Vessel Wall

by LH Barbarini

ESP32 factory installer

Install firmware

Connect a supported ESP32 board with a USB data cable. Installation erases the device and writes the complete Vessel Wall factory image.

Use current Chrome or Edge on a desktop computer. Serial access requires this secure GitHub Pages site. Firmware 1.0.2

After installation

  1. Disconnect and reconnect power.
  2. Join the VESSEL-WALL Wi-Fi network.
  3. Open 192.168.4.1 and select the operating Wi-Fi network.
  4. Open the settings page and enter your Vessel Wall API key.

Vessel data requires an API key. Request access by emailing lhbarbarini@gmail.com.